LumenWerx LED Custom Light Run 625Lumen per ft. 3500K
These Lights come from a High-End Custom Order and are Leftovers or Overage from Order = Brand-New Lights at a Huge Discounted Price!
This listing is a little different from most as these items are High-End Specialty Lights and are a mixed lot as explained above and We are selling all lights as a bundle package.
Included in listing
Five 8' Ends Open on one end with connectors and sealed on other end with control eye (Grey) 8' L x 4.5" H x 4" W
One 8' End Open with Connectors on one end and Closed on other end with 1" inset to cap (Grey) 8' L x 4.5" H x 4" W
Nine 8' Centers Open on both ends with connector tabs on one end only (Grey) 8' L x 4.5" H x 4" W
Four 4' Lights with Set back on Open end with no connector tabs and Cap on other end with control eye (Grey) 8' L x 4.5" H x 4" W
Three 8' White Square Lights = Two ends & One Center (White) 8' L x 4.5" H x 4" W
Two Square 8' Hanging Lights = makes One 16' Light (White) 8' L x 4.5" H x 4.5" W
Four Flat Hanging 8' Lights = makes Two 16' Hanging Lights (White) 8' L x 2" H x 8" W
One 4' Square Light In-Set for drop ceilings or ??? (White) 4' L x 5" H x 4 3/4" W
DESCRIPTION
Cava is a linear LED recessed, surface and pendant luminaire with a remarkably comfortable and surprising appearance. Using completely concealed and indirect LED arrays, Cava provides superior brightness control, while maintaining high efficacy by distributing light over the vaulted interior cavity of the luminaire. See separate spec sheets for other available design and mountings.
LUMINAIRE LENGTH
Cava is made up of standard 2, 3, 4, 5, 8 and 12 foot sections that may be joined together to create longer continuous run lengths. Nominal run length must be noted in the product code. The minimum individual section available is 2 foot. All individual sections are joined together onsite using the joiner kits provided. LumenWerx offers joiner kits that are extremely simple to work with in the field and result in a fixture that appears virtually seamless with no light leak at any connection.
ELECTRICAL
Factory-set, adjustable output current LED driver with universal (120-277VAC) input. Dimmable from 100% to 1% with 0-10V dimming control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other
specifiable options include Lutron Hi-Lume 1% (specify 2-wire, or Ecosystem Dim-toOff), Lutron 5-Series (5% Ecosystem), DMX (RDM compatible) and DALI protocol drivers. All of our standard 0-10V drivers are NEMA 410 compliant.
FINISH
Interior - 95%, reflective matte powder coated white paint
Exterior - matte white, matte black or aluminum powder coating.
Please view our other listings for more from LumenWerx / Focal Point
CONTROLS LumenWerx offers several options for integrating occupancy and daylight harvesting controls in our luminaires. STANDALONE CONTROLS An integrated standalone sensor controls the luminaire in which it is installed. Depending on the length, more than one sensor may be necessary and may control the entire luminaire, or just a section of it. These controls operate independently. Unless otherwise agreed, location and functionality of the sensor within the luminaire are selected by LumenWerx. Three types are available: OMS: An integral Passive InfraRed (PIR) sensor turns luminaires on and off automatically with field-adjustable time out period. No wall control is used. Coverage pattern for large motion has a 12' diameter with the sensor mounted 8' above the floor; for small motion, the pattern has an 8' diameter. Typically, one sensor is required for every 10' of a continuous luminaire run. ODS: An integral, daylight harvesting sensor with closed-loop operation dims the luminaire in which it is installed in order to compensate for available daylight. The sensor measures the combination of daylight and luminaire light reflected from horizontal surfaces below the luminaire. Initial onsite calibration is required via the use of provided remote control. OCS: Both an occupancy and a daylight sensor are installed in the luminaire.
CONNECTED CONTROLS With Connected Controls, sensors or nodes installed in the luminaire form part of a larger control system infrastructure from manufacturers such as: Lutron*, Enlighted, Osram ENCELIUM, Acuity nLight, Crestron and others. These connected controls allow for a scalable system providing features like occupancy and daylight control, manual control, scheduling and configuration of various zones and scenes. Energy reporting and system monitoring are also possible. Specific capabilities depend on the control system being used. LumenWerx installs the components (sensors, nodes, power packs, etc) which may be supplied to us by a third party, or procured directly by LumenWerx, depending on the control system manufacturer. LumenWerx is solely responsible for the installation of specified components; the controls manufacturer is responsible for performance of the control system. To indicate a LumenWerx luminaire with Connected Controls, identify the specific onsite control system to be integrated into the luminaires using the ordering code. Due to the diversity of components, you must contact [email removed by eBay] to assure complete compatibility with intended control system and to fully specify the luminaire
OPTICS REDUCED LUMINANCE OPTIC (RLO) - reduced Luminance Optic (RLO) consists of indirect-mounted LED arrays illuminating a vaulted reflector with a matte white finish greater than 95% reflectivity. The ultra-shallow arrays in RLO completely conceal the light source while evenly distributing brightness over the entire surface of the cavity using a combination of multiple reflective bounces and a very high diffuse reflectivity. Compared to diffusing optics, RLO reduces luminaire brightness due to the visible interior surface being larger than the aperture. LIGHT SOURCE - LED Custom linear array of mid-flux LED's are cartridge-mounted with quick-connect wiring to facilitate service and thermal management. Available in 3000K, 3500K and 4000K with a minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize efficacy and lumen maintenance. All LEDs have been tested in accordance with IESNA LM-80-08 and the results have shown L80 lumen maintenance greater than 60,000 hours. Absolute product photometry is measured and presented in accordance with IESNA LM-79, unless otherwise indicated. PERFORMANCE PER 4' AT 4000K LED output Color Temp Watts Nominal Delivered Lumens Efficacy LPW low output 4000K 11.5 1400 122 medium output 4000K 17 2000 119 high output 4000K 25 3000 119 LUMINAIRE LENGTH Cava is made up of standard 2, 3, 4, 5, 8 and 12 foot sections that may be joined together to create longer continuous run lengths. Nominal run length must be noted in the product code. The minimum individual section available is 2 foot. All individual sections are joined together onsite using the joiner kits provided. LumenWerx offers joiner kits that are extremely simple to work with in the field and result in a fixture that appears virtually seamless with no light leak at any connection.
ELECTRICAL Factory-set, adjustable output current LED driver with universal (120-277VAC) input. Dimmable from 100% to 1% with 0-10V dimming control. Rated life (90% survivorship) of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At maximum driver load: Efficiency>84%, PF>0.9, THD
