Super strength dual-action stripping formula
Removes the most stubborn paint systems
Non-flammable
Methylene chloride free
No neutralization required
Protect all surfaces not being stripped with polyethylene sheeting. Protect plants and vegetation.
APPLICATION
Piranha NexStrip Pro is a ready to use product. Do not dilute. Mix before using for best results. Ideal working temperatures are between 60-90°F; when applied at surface temperatures below 55°Fperformance will be reduced and longer dwell times may be required. Higher temperatures can dry out remover prematurely which will stop the paint removal process; reapply to rewet the original coat if drying occurs prior to removal. Applying too thin can result in premature drying and result in additional product applications. Avoid direct sunlight. Workers must wear impervious gloves, apron and footwear and safety goggles and/or face shield while using Piranha NexStrip Pro. Take wind drift into consideration if spraying.
1. Apply Piranha NexStrip Pro with a brush, a trowel or airless spray equipment.
2. Brush: Synthetic, nylon or polyester bristle
3. Spray: .023 to .030 tip size, .75GPM flow rate,3/8” hose, remove filters to improve flow and clean equipment thoroughly after application to prevent corrosion.
4. Clean all applicators and equipment with soap and water or denatured alcohol.
APPLICATION THICKNESS
Apply Piranha NexStrip Pro between 1/16”1/4”thick. When applying with an airless sprayer two coats will be necessary to achieve required film thickness.
COVERAGE
40-60 square feet per gallon. Coverage rates will vary depending upon surface, application method and application thickness. Be certain that all uneven or irregular surfaces receive adequate coverage.
CLEANUP
Once the paint has fully softened and lifted, remove using a scraper or putty knife. Collect all remover waste and paint residue for proper disposal in accordance with all federal, state and local regulations. Do not store or collect removed paint or residue in metal containers. Use plastic containers only. Immediately following paint removal thoroughly clean substrate with mild detergent solution. If there is a thin layer of paint residue that remains agitation with a damp nylon bristle brush, sponge or pressure washing will usually remove this layer. Perform a final clean water rinse and let surface fully dry prior to painting. All Piranha NexStrip Pro residues must be fully removed prior to painting. Close container after each use. Keep away from heat sources and keep from freezing. Shelf life is 36months in original, closed containers stored at temperatures between 55 and75°F.
PRECAUTIONS
Protective clothing should be worn. Wear rubber gloves. Wear eye protection at all times. Face and head protection should be worn when working at face level or overhead. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists. Do not take internally. Use only with adequate ventilation. Wash with soap and water after each use. Keep container closed when not in use. Store in a dry place at temperatures between40°F (4.5°C) and 90°F (32°C).
